Skip navigation

601-353-4681

Serving Hinds, Madison and Rankin Counties

Uh-Oh! My Toilet Won’t Stop Running!

A toilet that won’t stop running is definitely annoying, especially since you use your toilet nearly seven times per day! And, not only is it incredibly annoying to listen to, but it’ll often lead to the inability to flush–and let’s face it, in a busy household, this can be quite a dilemma. Oh, and if that weren’t bad enough, a running toilet can end up costing you hundreds of dollars on wasted water. Oof!

So what do you do?

For one, you should definitely call in your local plumber for assistance! You see, your plumbing in Pearl, MS requires the hands of a trained professional, so it’s important that you schedule your services at the first sign of trouble.

Below, we have listed just some of the reasons why your toilet might be running–all you’ve got to do is keep reading to find out more.

So, What’s Up With My Toilet?

There are a number of things that can lead to a running toilet. These include:

Problems with the float ball

The float ball is the small ball that sinks down when the tank empties with a flush, opening the inlet valve on the fill tube. As the tank fills, the float ball rises, eventually closing the valve and stopping the filling process. If the ball is misaligned or malfunctioning, the valve will not close and the toilet will continue to run.

Malfunctioning refill tube

The refill tube is the component of your toilet that replenishes the water in the tank. Generally, the top of the tube remains above the water level. However, if the top of the tube sinks below the water level, your toilet may begin to run.

Improperly sized flush valve chain

The chain is the mechanism that pulls open the flush valve and allows freshwater into the tank. If the chain is either too long or too short, it can affect the toilet’s ability to flush by not allowing the flush valve to close properly.

Flush valve issues

The flush valve is the component that needs to be sealed completely after each flush to keep water from leaking. Eventually, however, this component can age to the point of malfunction or begin to develop mineral deposits. Both of these issues can prevent the valve from properly sealing.

Worn gasket

The gasket is the seal between the water tank and the toilet bowl. If this part is worn out, it might allow water to run from the tank into the bowl.

Don’t Wait to Call in a Pro!

If you’ve run into this issue, it is important to schedule plumbing repair services ASAP. A running toilet can end up wasting gallons upon gallons of water, causing your monthly water bill to skyrocket!

An experienced plumber can accurately diagnose the cause of your running toilet and fix it before it causes any further issues. Of course, there are hundreds of DIY videos and articles online, but sometimes an attempt to save money can end up costing you more in the long run. Call a professional to get the job done right the first time.

To schedule your plumbing services, contact Environment Masters, Inc.

Comments are closed.